- The Home Mender shows us how to remove a buckled seam from a ceiling or wall, apply new tape and mud. Click the links to see what's inside 'Dustin's Toolbox'.
- A crack between the ceiling and wall. The ceiling joists and roof trusses have been designed to move up and down, and expand and contract with changes in humidity and temperature. As the wood moves so the drywall, fixed to the wood, moves with it.
- The least expensive method of repairing the crack involves re-taping the horizontal seam where the wall meets the ceiling. Before applying a new drywall corner bead.
At Matthews Wall Anchor & Waterproofing Services, our team of professionals will inspect and determine the cause of your ceiling cracks. CAUSES OF CEILING CRACKS. Ceiling cracks can be caused by many factors, but the most common causes are due to the following issues: Too much moisture: Too much moisture can be caused by leaky plumbing.
Exterior ceiling repair-paper tape cracking and falling down
This type of problem is very common on interior and exterior drywall ceilings
.
Over time the paper drywall tape begins to crack and fall down due to the heat and humidity from our harsh Florida climate.
The extreme weather changes cause the wood framing to expand and contract on a daily basis in turn causing just enough movement of your ceiling to crack and pop the paper tape joints. Especially if the ceiling was nailed or not enough screws were added during the drywall installation process when your home was built. Due to the drywall crew trying to move to fast!
That’s why I always re-secure the drywall joints with screws and check the entire ceiling to make sure it was secured properly during the construction phase. A lot of times the ceiling needs to be completely re-screwed.
The paper tape joints were cracking and starting to fall down on this pool patios drywall ceiling in Viera.
After I removed the tape and while securing the ceiling and joints with screws. I figured out that one section of a drywall seam was sagging in an area where there was no wood framing member to attach the drywall to and had popped the paper tape from movement.
Paper tape joints removed
So I cut out a small 4″x6″ section of the ceiling and added a furring strip to span over both sides of the sagging drywall tape joint. Which I attached to the backside of the ceiling by screwing four screws into the furring strip from the finished side of the ceiling.
Checkout——>My Amazon Top 100 Drywall Repair Tools
Then, I re-attached the same piece of drywall that I had cut out for a perfect fit.
Crack At Ceiling Wall Joint Diagram
Next, I installed the self adhesive fiberglass mesh tape and applied three coats of 20 minute Easy Sand quick setting joint compound to the exposed seam and completed the drywall finishing by skim coating the entire ceiling with USG Sheetrock all purpose joint compound (green lid).
This way when I do the skip trowel texture, it will all be one consistent texture. Instead of trying to blend the new texture from a repair into the old texture. Which sometimes can still be noticeable depending on several different factors. Such as painted surfaces absorb differently even after priming.
Tape joints second coated and remainder skim coated
Applying the final skim coat to one of the repaired tape joints
I then applied a skip trowel texture to the entire ceiling and let it dry for 24 hours.
Applying skip trowel texture to the ceiling
Lastly. I primed the entire ceiling with quality exterior water based primer and top coated the newly skip troweled ceiling with two coats of a quality flat white water based exterior paint.
Primed and Painted
Here’s a Speed Video of the entire process:
Drywall Tape Joint Ceiling Repair, Skip Trowel Texture, Prime and Paint:
[ebs_seo_cp_map_only]
Serving all of Brevard County
How To Fix Crack Between Ceiling And Wall
Please give us a call for a prompt and accurate quote!
Melbourne/Viera: 321-777-9337
Cocoa Beach/Merritt Island: 321-453-6233
Brevard County Drywall Contractor and Painting Contractor since 1995